Products tagged with Mark's Minitools

Blades for Hobby knifes and scalpel blades
Packed per 5 Pieces
Choose from drop-down list:
Hobby knife #1:A1, A2, A3, A4, A5
Hobby knife #2:B1, B2, B3, B4, B5

Scalpel handle 3&7:10,10A, 11, 12, 15
Scalpel handle 4:20

Miter cutter

Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc.

Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened)

Dimension: 210mm x 210mm

Cutting length blad

Colle 21 anaerobic cyanoacrylate glue - 21 gram

COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure made (15 to 45 seconds) wil

Triangle screwdriver bit set
1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm

often used to remove base plates from scale model cars

Mini Machinist Square

Size ca.20x25mm

Masking Tape
Acid free, leaves no glue residue
Length: 18 meter

Available sizes:
1mm
2mm
3mm
6mm
10mm

Nail press 2mm / 3mm
A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place.
Make your choice:
Blue - for

Mini drill press vice / Machine vice

Manufactured from milled and ground steel

- Very little chance of damage to workpiece due to smooth finish

- Equipped with horizontal and vertical grooves for clamping round shapes.

- Clamping Jaw width: 40

Fretsaw

Fretsaw to be used to saw wood profiles, plastic and fine metals.

Diamond Burs + diamond disks - 25 parts

18 Diamond Burs
5 diamond disks (metal)
2 Holders
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.

Mini nutdriver set

3.0 / 3.5 / 4.0 / 4.5 / 5.0mm

Applicator Micro Brush
Select your choice

Drill Set 0.30 - 1.60mm - HSS - titanium

Titanium coated. Better for drilling metals, last longer.

20 HSS drills in sizes:
0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60

Packed in plastic...

Miter sanding aid - angle sanding
The angle can be adjusted.
The handpiece has a slide (stop).
Comes with a set of 3 extra sanding belts:
150 Grid
240 Grid
320 Grid
Sanding belt set is also available separately.

Ideal for profiles in styrene, wo

Diamond flat file set # 40, # 60, # 150, # 240, # 400, # 600

• 6-piece set of flat diamond files
• Length: 21.5cm
• Diamond length: 8cm
• Width: 11mm + diamond layer
• Thickness: 3 mm + diamond layer
• Grit: 40, 80, 150, 240, 400 and 600
• Dipped

Mini vise
Jaw width 40mm
Maximum opening: 30 mm
Can be mounted on the table with the screw holes.

Rotating platform 25 cm

Circular saws mini - 6pcs

Ideal for Proxxon, Dremel, etc.

Sable brush, 3 sizes
0, 00 or 000

Machinist Square

Size ca.57x77mm

Humbrol Maskol
Humbrol Maskol is a liquid. when dried it looks like a kind of rubber film. This allows you to easily protect parts of your model when you are going to paint or for example want to apply camouflage. It is recommended not to leave the dried

Sandpaper file

3 Variants:
120 Grid
180 Grid
240 Grid

Single sanding belts also available

Drill Set 0.30 mm - 1.60 mm - HSS

20 HSS drills in sizes:
0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60

Packed in plastic dispenser

Modelling pencil - silicon tip
5 pcs.

Choose from:
Medium density - 3mm tip (grey)
Medium density - 6mm tip (grey)
High density - 3 mm tip (black)