Hand drill with chuck and rotating base For drills from 0.3 - 2.5 mm

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Hand drill with rotating base Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes) When drilling, the other collet is stored inside the shaft.

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Hand vice with wing nut Vice: Steel Width of Jaws:27mm Handle: Wood Max. Opening: 22mm Serrated haws with a vee

Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Third hand base with magnifier 90mm LED For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x with LED light Completely adjustable.

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Third hand base with magnifier For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 60 mm, magifies 2.5x Completely adjustable.

Hand drill / vice For drills from 0.3 - 1.0mm

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Mini clamp on stick

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Clamp

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm