Mini Anvil

Needle nose pliers straight fine

Scriber used for marking metals and plastics. also usable as center punch

Machinist Square Size ca.70x100mm

Machinist Square Size ca.68x102mm

scraping-knife For scaping and deflash plastics and metals.

Hole Punch Set - 7 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Handpiece and hole punces in Sizes: 1,5 - 2,0 - 2,5 - 3,0 - 4,0 - 5,0 mm

Lomer Nr.4 11x6,5cm Used for clay cutting, smoothing, contouring and pattern decoration. Can be used both as a hand shaping and turning tool. Available in 5 versions

Lomer Nr.2 11x5cm Used for clay cutting, smoothing, contouring and pattern decoration. Can be used both as a hand shaping and turning tool. Available in 5 versions

Modeling spatula 20cm No. 31 Wooden modeling spatula. Used for clay cutting, smoothing, contouring and pattern decoration Available in 21 designs

Modeling spatula 20cm No. 19 Wooden modeling spatula. Used for clay cutting, smoothing, contouring and pattern decoration Available in 21 designs

Modeling spatula 20cm No. 14 Wooden modeling spatula. Used for clay cutting, smoothing, contouring and pattern decoration Available in 21 designs

Clay loop tool set 20 cm - 6 pieces. - premium Sturdy sculpting tool with loops in various shapes. Suitable for removing excess material or for hollowing out. Total length: approx. 20 cm

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Glasses arms can be replaced by a headband - Interchangeable lens magnification: 1x, 1.5x

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

Modelling Wax Hard Extremeley low oil concentration (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc. Hard variant - Suitable for small an

Medium Brass chain 2.2mmx1.8mm Length: 30 cm

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Diamond file flat Size: Width: approx. 11mm, Thickness approx. 2 mm length total: approx. 210mm, file: appox. 78mm

Degree Protractor Multifunction

Rivetting Hammer Steel Standard hammer

Polishing File - Mini 1200/1600 grit approx. 9cm long

Brass tubes - Set 4 Slide Fit Tubes can slide into each other telescope effect. 1x 1.1mmx200mm 1x 1.6mmx200mm 1x 2.1mmx200mm 1x 2.6mmx200mm

Mini Tweezer straight 7,5cm With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality