Photo Etched parts Bender (Large) with 4 bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 79mm x 162mm

Scriber set - 4 pieces Different shapes hooks

Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Triangle screwdriver bit set 1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm often used to remove base plates from scale model cars

Diamond files Special shapes Set 10 pcs.

Xuron Photo Etch Scissor

Reamer Conical 0-14mm

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Colle 21 Dense - anaerobic cyanoacrylate glue - 20 gram Dense: the thicker version of the normal Colle21. works better with porous materials. COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your asse

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Mini open end- and ring spanner set 3.2mm / 4mm / 5mm / 5.5mm / 6mm / 7mm / 8mm / 9mm /10mm Thin version, 1.6mm thick.

Mini Locking Pliers Long or short Total Length 11-12cm

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Rubber block For punching and cutting Size: 50x50x25 mm

Cutting Mat din A4 (300x220mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Plier tweezernose

Degree Protractor and center finder tool

Tin snips To cur thin metal sheets and photo etch.

Diamond flat file set # 40, # 60, # 150, # 240, # 400, # 600 • 6-piece set of flat diamond files • Length: 18cm • Diamond length: 7cm • Width: 10mm + diamond layer • Thickness: 1,8 mm + diamond layer • Grit: 40, 80, 150, 240, 400 and 600 • Dipped PVC han

Mini clamp

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth