Your cart is currently empty
Solder tin wire - 0.5 mm, lead free Sn 99.3 Cu0.7 - Rosin Core 10 gram
Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm
18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content
Masking Tape - Flexible Acid free, leaves no glue residue Length: 18 meter Available sizes: 1mm 2mm 3mm 6mm 10mm
Magnifying glasses clip on - 2x magnification use in cobination with normal glasses
Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.
Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.
Third hand base with magnifier For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 60 mm, magifies 2.5x Completely adjustable.
Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...
Colle 21 - Debonder21 Solvent for Cyanoacrylate Super Glue Adhesive The ideal product for cleaning and loosening superglue / cyanoacrylate adhesives. Instructions 1. Apply a few drops of Debonder 21 to the surfaces to be cleaned using the supplied brush
Palette Knife Set 5 different palette knives. Flexible stainless steel spatulas with wooden handle
Professional Scalpel handle no.3 Swann Morton (without blade)
Brass tubes - Set 8 1x 2.1mm x 200mm 1x 2.3mm x 200mm 1x 2.5mm x 200mm 1x 2.8mm x 200mm
Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:
Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.
Find the order you'd like to withdraw
Enter your email address and order number.
Check your mailbox
If your details match an order, you'll receive an email with a link to view and manage it.