Diamond Reamer

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Colle 21 Epoxy glue - 2 component glue. In handy tube for equal dosage. Mix the 2 parts together well. Sticks in 20-30 seconds. Full curing in a few hours. Widely applicable adhesive Good adhesive strength Waterproof Resistant to temperature changes Sui

Colle 21 Dense - anaerobic cyanoacrylate glue - 20 gram Dense: the thicker version of the normal Colle21. works better with porous materials. COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your asse

Brass tubes - Set 7 1x 1.5mm x 200mm 1x 1.6mm x 200mm 1x 1.8mm x 200mm 1x 2.0mm x 200mm

Mini Tweezer straight 7,5cm With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality

Pressure regulator and moisture separator for compressor The gauge indicates the operating pressure of the airbrush. To adjust the pressure, pull the knob upwards, then it can be turned. Turn clockwise to increase pressure; turn counterclockwise to decrea

Mini collet holder with 2 collets For example to hold small dills in bigger drill chucks 2 Collets: 0-1.5MM 1.5-2.5MM

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Airbrush quick joint 1/8" Usable between the airbrush and the airbrush hose Please choose your Airbrush Quick Joint with or without an air regulator

Scriber set - 4 pieces Different shapes hooks

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Sable brush, 3 sizes 0, 00 or 000

Mini Machinist Square Size ca.20x25mm

Diamond Burs  cylinder round - 20 pcs. 5 x Ø 1.5 mm 5x Ø 2,0 mm 3 x Ø 2.5 mm 3 x Ø 3.0 mm 2 x Ø 3.5 mm 1.x Ø 4,5 mm 1 x Ø 5.0 mm Base thicknes 2,35mm Ideal for Proxxon, Dremel and comparable machines.

Precision mechanics screwdriver set, 9-part Torx Slotted / Phillips PH precision screwdriver set, 9 pcs. in a practical storage map. Ideal for all professionals in the fields of precision mechanics, electronics, jewelry production, optics. Enables precis

Xuron Vertical Track Cutter

Circlip pliers 2x 180º 1x 90º 1x 45º

Grip tool Holds small objects by itself

Tin snips To cur thin metal sheets and photo etch.

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Airbrush connector: internal thread 1/8 - male thread G1/4

Airbrush hose 1/8" - 1.8M / 3.0M / 5.0M Flexibel airbrush hose, connection on both sides 1/8 inch. Please choose your length 1.8 Meter 3 Meter 5 Meter