Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Airbrush connector : internal thread M5 - male thread G1/8

Plier tweezernose

Mini Handvice Opening: 0.4-1.0 mm

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips Material: Stainless Steel Premium Quality

Hammer Rubber/Steel Hammer with rubber and steel head

Extra thin cement - plastic glue - Blue The blue color provides extra visibility so that glue residues can be easily removed Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to

Colle 21 Thread Locking Agent - 50ml Prevents loosening of bolts and nuts caused by vibration. Prevention of rust and corrosion Removable: Can be removed with hand tools. Curing: 10 minutes and fully cured in 24 hours.

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Wire Loop cutter 50cm. For cutting clay

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Airbrush connector: internal thread 1/8 - male thread G1/4

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Tweezer support / holder clamp Adjustable support, for cross tweezers

Woodcarving knife slant

Cleaning sticks Ideal for cleaning airbrusch Package contains 10 pcs.

Mini collet holder with 3 collets For example to hold small dills in bigger drill chucks 3 Collets: 0-0.8MM 0.8-1.5MM 1.5-2.5MM

Hand drill with spring Chrome For drills from 0.3-1,0mm

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Tweezer Slanted narrow point - flat closure - Stainless Steel / anti magnetic  Material: Stainless Steel Premium Quality Material: Stainless Steel Premium Quality

Airbrush connector: male thread G1/8 - male thread G1/8

Brass tubes - Set 5 Slide Fit Tubes can slide into each other telescope effect. 1x 1.3mm x 200mm 1x 1.8mm x 200mm 1x 2.3mm x 200mm 1x 2.8mm x 200mm